Export DepartmentEva XuuEmail: xxxxxxxxxxxxxPhone: xxx-xxxxxxxxxxFax: xxx-xxxxxxxxxxWebsite: xxxxxxxxxxxxxShow more contact information
Yangjiayuan, ShuangtangJinghaiChina, 301600Web Page Link: https://www.toboc.com/tianjinhuayuantimesmetalproductscoltd.aspx
InformationDiameter Range of single wire: As determined by a specific project- typical is 2.2mm to 2.3mm plum or minum 0.05mmElongation: Minimum 7 Percent/Maxmum 10 Percent in 254mm sampleTensile Strength: Typical 965-1172Mpa- can vary some based on diameter considerationsHelix (Vertical Cast): Posi
More...
Additional InfoDiameter Range: 0.6-2.20 mmSurface Finish: Hot Dipped GalvanizingGalvanised Wire Working SpecificationsGiven that galvanized wire is classified according to the amount of zinc coating, the following table outlines the difference between tensile strength.
Galvanized Wire is made to BS EN 10244. The metallic zinc coatings applied by the galvanizing process are an effective way of combating corrosion in steel.Additional InfoDiameter Range: 0.2-5.00 mmSurface Finish:Electro Galvanizing Galvanised Wire Working SpecificationsGiven that galvanized wire is
Additional InfoDiameter Range of single wire: 1.0mm -6.20 mmDiameter Range of the strand: 8mm~65mmStructure:1*7 1*191*37Surface Finish: Hot Dipped GalvanizingGalvanised Wire Working SpecificationsGiven that galvanized wire is classified according to the amount of zinc coating, the following table ou
Additional InfoInner diameter Range: 2.0-4.0 mmOutside diameter range:2.2mm-5.0mmSurface of the wire: Black Annealed Electro Galvanized Hot Dipped GalvanizedGalvanised Wire Working SpecificationsGiven that galvanized wire is classified according to the amount of zinc coating, the following table out
Additional InfoDiameter Range: 5 mmSurface Finish: Hot Dipped GalvanizingGalvanised Wire Working SpecificationsGiven that galvanized wire is classified according to the amount of zinc coating, the following table outlines the difference between tensile strength. Products Description:
Chain Mesh wire has been specifically developed to suit most types of chain mesh machines. Its high quality enables manufacturers to achieve higher machine efficiencies.Chain mesh wire is woven into chain mesh fences that are widely used for industrial security, tennis courts, parks, safety fences o
Hard Drawn Low Carbon Wire has been cold drawn to the required diameter and heat treatment is available. Often used for plating, redrawing and coating, it is important that the surface finish of the wire is clean and smooth. It will take moderate bending or flattening, machine ability is fair and th
TS 16949 Control Cable Steel WireCable Steel Wire High Carbon Control Cable Steel Wire Bright and Galvanized Control Cable Steel WireTS 16949 Control Cable Steel Wire1.1.07mm2.TS 169493.Bright Coating and Galvanized4.Control Cable
Additional InfoDiameter Range of single wire: 1.0mm -6.20 mmDiameter Range of the strand: 8mm~65mmStructure:1*7 1*191*37Surface Finish: Hot Dipped GalvanizingStandard: ASTM A925Galvanized Coating: 120g/m2-350g/m2Aluminium coating: 5 Percent or 10 PercentDia. Range(mm)Tensile(Mpa)Stress at 1 Percent
alvanized Wire is made to AS/NZS 4534 "Zinc and zinc/ aluminium-alloy Coatings on Steel Wire" BS EN 10244. The metallic zinc coatings applied by the galvanizing process are an effective way of combating corrosion in steel. Galvanized wire for general manufacturing purposes is available in a standard
Galvanized Wire is made to BS EN 10264. The metallic zinc coatings applied by the galvanizing process are an effective way of combating corrosion in steel. The wire is used for wire rope and automotive control cable etc. Galvanized wire for general manufacturing purposes is available in an En 10264