Products
[
Product #: RMT 69]
A favourite rock drill among the drill operators. For deep hole cleaning blower lever is provided. It gives constant drilling speed through out a long service life. An efficient lubrication system ensures continuous protection of working parts.Model RMT 0069Weight27.5 kg59 lbLength610 mm24"Hole ran
More...
[
Product #: RMT 658]
RMT 658 is the most popular hand held rock drill (Jack Hammer), globally. In relation to weight, it delivers very high penetration rate at very low air consumption. Mostly used in Quarry work, Blast hole drilling, Tunneling, construction sites etc. With H22 integral / extension steels, it can drill
More...
[
Product #: RMT 571]
RMT 571 suits for smaller jobs owing to its light weight. It is very low maintenance drill. Spares are easily available. It has blower which ensures deep hole cleaning.Weight18 kg40 lbLength510mm20”Air Consumption39 l/s83cfmPiston Diameter55mm2 & 188”Piston Stroke60mm23/8”Blows / min2040Air Pressure
More...
[
Product #: RMT 656W]
RMT 656W RMT rock drills are a combination of high performance and reliability. It has low spare parts consumption so maintenance cost is at its minimum. Though simple to operate, they are robust and even with low air consumption, they offer high impact. Along with their pusher legs, they are proved
More...
[
Product #: RMT 46WR-6 [BBD 46WR-6]]
RMT 46WR-6 [BBD 46WR-6]Because of the large diameter of the piston these drills are equally efficient with low air pressure. It comes with robust ratchet wheel rotation mechanism, short stroke and good penetration rates in soft and medium hard rock. The WR version with clockwise rotation can be used
More...
[
Product #: RMT 120F]
The drifter is designed for long hole drilling in underground mines, grouting holes, bench drilling for surface mining and construction applications. In underground mining and tunnelling it is used for ring drilling and face drilling. The drifter is rifle bar rotated and with reversible rotation. It
More...
[
Product #: RMT- DTH Hammer]
DTH HammerWe provide both valve and valve less designs of DTH Hammer which ensures higher and consistent penetration rate at minimum energy consumption and maintenance. It can be easily disassembled and reassembled. Only the best quality alloy steel is used for manufacturing of hammers and bits. It
More...
[
Product #: RMT 117]
Paving Breaker:Special raw material is used to make the drill shock resistant. Drills is designed to for a variety of construction works and plant maintenance applications such as breaking reinforced concrete, tamac cutting and general demolition work. Technically equivalent to Chicago Pneumatic CP
More...
[
Product #: RMT 1210]
RMT 1210:Robust yet light weight feature of this drill makes it a preferred choice. Mainly used for light to medium construction work such as demolition of floors, pavement and roads. A popular tool for bridge deck jobs and utility work. Weight20 kg44 lbLength540 mm21”Air Consumption26 l/s56 cfmChuc
More...
[
Product #: RMT 05P]
Technical Details:Model RMT 05PTechnically equivalent Weight5.5 kg12 lbLength380mm14 15/16”Air Consumption9.5 l/s20 cfmChuck SizeH19x50 mm3/4 x 2”Blows / min2760
More...
[
Product #: RMT 4123 4H]
RMT 4123 4H RMT series of chipping hammers are available with or without retaining mechanism. Weight and power is scientifically combined for optimum operator comfort. Following industries mostly use these hammersWeight7 kg15 lbLength394 mm15 1/2”Air Consumption27 l/s13 cfmChuck SizeH 14.7Blows / mi
More...
[
Product #: RMT 10PSKL]
RMT 10PSKL RMT pic hammers are a right mix of low weight and high productivity.Hammers with D type handles are most productive in their medium weight class.These pick hammers are gives the same level of high production under toughest of conditions, delivering power with precision.Weight10.5 kg23 lbL
More...
[
Product #: RMT 09PSKL]
RMT 09PSKL RMT pic hammers are a right mix of low weight and high productivity. Hammers with D type handles are most productive in their medium weight class. These pick hammers are gives the same level of high production under toughest of conditions, delivering power with precision.Weight12 kg26 lbL
More...
[
Product #: RMT 4608D]
RMT 4608D Rivet busters are heavy duty powerful hammers. Teasing throttle offers superb control on blow frequency and energy. These busters are used for heavy duty chipping , demolition of reinforcement and cutting off large rivets. It reduces the operating cost and avoid All these features have th
More...
[
Product #: RMT 14RR]
Hand Rotary Drill:These rotary hammers are used in a wide variety of constructions and maintenance applications. Few examples are driving or setting masonry anchors and drilling holes in concrete, bricks or rock. As a hammer, these tools can also be used for chipping, scarifying, scaling and cleanin
More...
[
Product #: RMT 222]
RMT 222 is a multipurpose pick. It has good power-to-weight ratio. Latch retainers ensure quick and easy change of steels. Both models are available with inside or outside trigger.Weight10 kg22 lbLength495 mm19 1/2”Air Consumption40 l/s85 cfmChuck SizeH22x82.5 mm7/8 x 3 1/4”Blows / min1700
More...
[
Product #: RMT 77]
Sludge pump easily handles water with 15 Percent solids and particles up to 25mm in size. Suitable for seawater and certain corrosive chemicals. It operates on ejector principle so no motor of deaphram pump to wear out. Exhaust muffler reduces sound level. Weight69 kg152 lbLength600 mm23 1/2”Max suc
More...
[
Product #: RMT 10]
RMT 10 :RMT 10 submersible pumps are ideal for removing water from trenches, ditches, manhole, industrial sumps and excavations. It has small cross section and can be lowered into areas having small access hatches. Used mainly in industries like Construction, De-watering, Marine etc.Technical Detail
More...
[
Product #: RMT 30 [BLG 30]]
Proper lubrication is an essential part for efficient performance of Pneumatic Tools. RMT range of lubricator is suitable for all type of compressed pneumatic tools, drilling rigs and hammers. 1.3 ltr lubricator is mostly used in Rock drills and breakers. Higher capacity lubricator is used in rigs.T
More...
[
Product #: Chisel For Pneumatic Tools]
Technical Details RMT pneumatic chisels are available in standard shanks to suit any brand of Pneumatic breakers. These are manufactured from high purity alloy steel that is heat treated to give maximum durability and toughness.
More...
[
Product #: RMT 1210]
RMT pneumatic breakers are available in weights, ranging from 35 lb to 90 lb class (20 kg to 41 kg). The hammers are available with different shank size, varying from 25 mm to 32 mm shank (1” to 1& 188”).These air tools are capable of light, medium and heavy duty jobs such as demolition, constructio
More...
[
Product #: RMT 0112]
RMT 0112 breaker is an ideal breaker where easy handling of the tool is a very important factor to complete the task. Though the tool is very light-weighted yet it withstands rough use in light construction work and plant maintenance. It has also got another model "RMT 0112 EXT" which comes with an
More...
[
Product #: RMT 20 PS]
RMT 20PS is a lightweight breaker that can handle most tasks. The breaker is made from one-piece housing. It does not have bolts that are often required to keep the machine together. This breaker has much lesser parts than other breakers of this category. Fewer parts make it “Easy for servicing tool
More...