Export DepartmentTaras TkalenkoEmail: xxxxxxxxxxxxxPhone: xxx-xxxxxxxxxxFax: xxx-xxxxxxxxxxWebsite: xxxxxxxxxxxxx
Novomoskovsk, UkraineNovomoskovskUkraine, 51200Web Page Link: https://www.toboc.com/novotest.aspx
Combined Hardness Tester NOVOTEST T-UD3The device operates with both UCI (Ultrasonic Contact Impedance) and Leeb (dynamic) probes. User get the benefits of two methods of measurement – it is the maximum that can be obtained from portable hardness tester. UCI method for the hardness testingThe ultras
More...
UCI Hardness Tester NOVOTEST T-U3The Ultrasonic Contact Impedance (UCI) probe is used for measuring the hardness value of small items, objects with a thin wall, complex form, and to measure the hardness of surface hardened layers.Built-in camera allows user to take a picture of testing object and ma
Leeb Hardness Tester NOVOTEST T-D3Dynamic (Leeb) probe is used for measuring the hardness of non-ferrous metals, cast iron, coarse-grained materials, massive products etc.Built-in camera allows user to take a picture of tested object and mark tested area with corresponding hardness value.Hardness Te
Combined Hardness Tester NOVOTEST T-UD2Combined Hardness Tester NOVOTEST T-UD2 is designed for rapid non-destructive hardness testing of :metals and alloys on standardized hardness scalesmetals with different properties from steel (for example, non-ferrous metals, alloys, cast iron, etc.) with addit
UCI Hardness Tester NOVOTEST T-U2UCI hardness tester NOVOTEST T-U2 is designed for rapid non-destructive hardness testing of:metals and alloys on standardized international scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV)metals with distinctions in properties of steel (e.g., non-ferrou
Leeb Hardness Tester NOVOTEST T-D2Leeb Hardness Tester NOVOTEST T-D2 is designed for rapid non-destructive hardness testing of various objects.Leeb Hardness Tester NOVOTEST T-D2 uses dynamic method of hardness testing – Leeb method, standardized according to ASTM A596.Leeb probe is used for measurin
UCI Hardness Tester NOVOTEST TUCI hardness tester NOVOTEST T is designed for rapid non-destructive hardness testing of:metals and alloys on standardized international scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV)metals with distinctions in properties of steel (e.g., non-ferrous meta
Shore Durometer NOVOTEST TS-AShore Durometer is one of the modern non-destructive testing instruments for measuring the hardness value of different materials at the workshops and laboratories. This device can be used at the radio instruments industry, mechanical engineering and other areas of modern
Shore Durometer NOVOTEST TS-CShore Durometer is one of the modern non-destructive testing instruments for measuring the hardness value of different materials at the workshops and laboratory. This device can be used at the radio instruments industry, mechanical engineering and others of modern indust
Ultrasonic Flaw Detector NOVOTEST UD2301Ultrasonic flaw detector UD2301 is designed for nondestructive testing of metals, plastics, glass, composite materials, weld inspection and measurement thickness of the various products and structures.Flaw detector allows user to detect various defects such as
Ultrasonic Thickness Gauge NOVOTEST UT-1Ultrasonic Thickness Gauge NOVOTEST UT-1 is designed for rapid non-destructive thickness testing of:products made of various metals, alloys and other materialsglass, plastic, composite and other products from non-metallic materialsthe walls of the tanks, pipes
Ultrasonic Flaw Detector NOVOTEST UD-1Ultrasonic Flaw Detector NOVOTEST UD-1 is designed to detect defects, such as discontinuity and heterogeneity of materials in products and welds, to measure the depth and position of their occurrence, thickness measurements, measurements of velocity and attenuat
Tensile Adhesion Tester NOVOTEST AC-4624Pull-off type adhesion tester is designed for measure the adhesion value of paints and other coatings on base and between layers or cohesive materials. Tensile Adhesion Tester NOVOTEST AC-4624 is manufactured according to EN13144 and ISO4624, ISO16276-1.The te
Cross Cut Adhesion Tester NOVOTEST AN-2409Cross Cut Adhesion Tester is designed according to: ISO 16276-2, ISO 2409, DIN 53151, ASTM B 335, ASTM D 3002, BS 3900-E6, BS EN ISO 2409, NF T 30-038.Cross Cut Adhesion Tester NOVOTEST AN-2409 is designed for adhesion testing by method cuts (parallel or lat
Viscosity Flow Cup NOVOTEST VZViscosity Flow Cup NOVOTEST VZ is designed for rapid determination of the relative viscosity (flow time) paints and other related products (Newtonian liquids).Viscosity cup could be manufactured according to: DIN 53211-87 (DIN 4), UNE ISO DIN 2431, ASTM D 120087 (FORD),
Coating Thickness Gauge NOVOTEST TP-1MPortable Coating Thickness Gauge NOVOTEST TP-1M – device for operative non-destructive testing of coating thickness in accordance with standard ISO 2808 with high measurement accuracy.Coating thickness gauge is designed to test:thickness of various thick protect
Dew Point Meter NOVOTEST KTR-1Dew Point Meter NOVOTEST KTR-1 is designed for rapid non-destructive measurement the temperature, humidity, dew point calculation and measurement the surface temperature by contact method.Dew Point Meter NOVOTEST KTR-1 allows user to measure:– air temperature (-20 to +
Pinhole Detector NOVOTEST ED-3DPinhole Detector NOVOTEST ED-3D is designed for rapid non-destructive testing the continuity of coating (e.g. porosity of film) with thickness up to 500mkm in accordance to ASTM G62-A.Pinhole Detector is designed for testing the porosity of partially painted places and
Erichsen Cupping Tester NOVOTEST SE-1520Erichsen stamp is designed to determine the elasticity and strength of coatings with a bowl-shaped bend (hood coverage for the Erichsen) in accordance with ISO 1520.The device is designed to determine the strength of coating during indentation of a spherical t
Impact Tester NOVOTEST STRIKE-U6272The device is designed for determining the strength of paint films (coatings) under impact 1 kg load or other loads.The design of the device STRIKE-U6272 is made in accordance with modern requirements of ISO 6272-2002.The device is used in factory laboratories for