Products
[
Product #: HY-688]
HYPERCOAT-688 is the range of high performance, seamless, cold-applied liquid waterproofingmembrane.CHARATERISTIC1. Quick and easy to apply. Single pack, liquid applied waterproofing membrane.2. Excellent hydrolysis resistance3. Still can curing when apply on the moisture surface without o
More...
[
Product #: CS-107]
Power Screw adhesive is one of ITLSnew range of power adhesives developed to give a cost effective and high adhesion performance. It is very low in odor and free of aromatic solvent for use indoor and outdoor. It was designed for use by both the home handy man and professionals.Power Screw adhesive
More...
[
Product #: CS-613]
CS-613 is a multipurpose water-based epoxy sealer/putty/adhesive.It’s developed for filling seam, gap between Calcium Silicate board.It is environmentally friendly which does not pose health hazard to user and dwellers. The best part is how easy it can be cleaned with just water.It’s easy to mix eve
More...
[
Product #: Doctor-Sil 929]
Doctor-Sil 929 Silicone sealant is neutral type and suitable for various construction sites.*Can apply on metal, aluminum, glasses, wood, resin, ceramic and fiber*No irritating smell*Excellent adhesion*Well weather-resistance
More...
[
Product #: FR-46]
ITLS FR-46 Firecaulk Sealant contains fire resistance properties for fire-rated concrete, masonry wall and plasterboard. It is recommended for the use of fire-rated wall but also suitable for needed gap filling of buildings.
More...
[
Product #: M7]
Doctor-Sil M7 Modified Silicone Sealant is a neutral cure, one component type and middle modulus sealant. It can be painted with water-based paint, and a flexible joint panel for new products. It reacts with moisture in the air to provide most materials with strong adhesion, durability, air tightnes
More...
[
Product #: PU FOAM]
DESCRIPTIONCS-340 Gun Foam (high speed) is a one-part, highly expansive and gun appliedpolyurethane fixing foam.APPLICATIONCS-340 Gun Foam (high speed) is used for fixing, insulating and filling connection joints around window- and door-frames, pipe entries around air-conditioning vents, roller blin
More...
[
Product #: AS-700CM]
AS-700 is a two components, high build brushable waterproofing polyurea coating forroofs, when mechanical durability and outstanding waterproofing properties arerequired. Does not require special application equipment. It forms a blister-free, nonpenetratingagainst moisture film, providing zero wate
More...
[
Product #: CC-500]
CC-500 Dura-Shine is one component, aliphatic, UV resistant polyurethane based topcoat membrane. Product cures with the humidity and produces a transparent film and by this way it provides excellent adhesion over the entire surface.
More...
[
Product #: CS-006]
DESCRIPTIONa premium cement based finish skimcoat which contains selected filler, additive and polymer used for smooth finishing to uneven concrete wall & ceiling. After dry STARCOAT CN havea excellent adhesion to the substrate, better impact resistant, no powdery, no cracks,smooth and ready to be p
More...
[
Product #: CS-006 PL]
STARCOAT PL, is fine grade cement based finish plastering skimcoat which contains selected filler and additive used for smooth finishing to uneven wall cement based plaster and ceiling. After dry STARCOAT PL have a good adhesion to the substrate, no cracks,smooth, no dust on the surface and ready to
More...
[
Product #: AS-600]
AS-600 is a high-solid, solvent-based polyurea coating. It’s also formulated with pure aliphaticresin and contains UV filters, remaining unaffected by the sunlight and adverse weather conditions. It cures fast providing quick tack free time (1-2 hours), allowing most projects to be completed within
More...
[
Product #: CA-509]
CA-509 Fibresil is a specialized chemical mixture of polymer fibreglass. After mixing with Portland cement, it shows outstanding performance in repairing various cement structures.
More...
[
Product #: HY-609]
HYPERCOAT 609 is water-based PU with modified bitumen, moisture cured polyurethane membrane.With a mix of high performance water-based PU resin from overseas, imported high quality natural rubber filler and emulsified asphalt to perform superior water resistance.
More...
[
Product #: CS-001]
Gap Filler is a multi-purpose and high quality sealant. It is composed of environmentally friendly water-base polymer emulsion and inorganic filler. It is smooth, flexible and easy to use after curing prevents cracking.
More...
[
Product #: OK BAND]
*Works on wet,dry,dirty or corroded pipe*Works under salt or fresh water*Works on any metal or plastic pipe*Cures in 10~15 minutes*No tools needed*Impervious to water,oils,chemicals,solvents&acids
More...
[
Product #: 792]
Doctor-sil 792 is a high performance, weatherable product and suitable for various interior/exterior joint sealing, glazing, and curtain-wall.It is designed to have 50 Percent movement capability, superior durability, weather ability and adhesion. Especially,it is a low modulus product which can eff
More...
[
Product #: CP-109]
The COMPOUND used in ITLS CP-109 membranes contains distilled bitumen,polypropylene polymers and stabilizing aggregates and is the result of many years of researchto obtain the best performance for specific roofing applications.
More...
[
Product #: CA-002]
CA-002 is an Acrylic Polymer emulsion, especially used to improve the physical properties of cement.It can be mixed with water at any ratio.
More...
[
Product #: LD5]
ITLS LD5 is a high performance liquid deadener for panel vibration damping and noise control.The exceptional vibration damping properties are complimented by fast drying,ease of use, environmental friendliness and low flammability.
More...
[
Product #: HY-570]
HYPERCOAT 570 is a pre mixed, pre coloured water based, slip-resistant UV stablecoating with excellent performance against wear and weathering, therefore providing arejuvenated fresh and safe surface coating that is suitable for internal and external use.HYPERCOAT 570 has excellent hot tyre resistan
More...
[
Product #: DS829]
Doctor-Sil829 is single component type acetoxy silicone sealant. As it excels in weatherproofing,durability,adhesion, and constructability,it may be used for various construction parts including windows and glasses. *Good weatherproofing and durability. *Maintains good flexibility *Excellent adhesio
More...
[
Product #: PU 50]
ITLS PU 50 is a single component polyurethane based elastomeric sealant which cures under the effect of atmospheric humidity to form a flexible and resistant joint with very good adhesion on most materials.
More...
[
Product #: CC-301]
CC-301 is 1-K aromatic moisture curing PU adhesive. It can be used as a waterproof primer for cement. CC-301 has excellent bonding strength, weather resistance, hydrolysis resistance after fully curing about 3 days.
More...
[
Product #: CC-604]
CC-604 is two components of water based surface paint, composed from water based of liquid epoxy resin and hardener and special pigment.Waterproof of concrete wall, resist to mold and decorative coating.Highly resist to chemicals in non-circulated places. Suitable for hospital,operation room,food fa
More...