Products
[
Product #: 3024]
Fiber-Mart’s Three-port Optical Circulator allows light to travel in only one direction. A signal entering to Port 1 will exit Port 2 with minimal loss, while a signal entering Port 2 will exit Port 3 with minimal loss. Light entering port 2 experiences a large amount of loss at port 1, and light en
More...
[
Product #: 1740]
Optical isolator is a kind of allowing only along the direction of light transmission, and the return of light isolation effect of optical passive components, this product uses the advanced packaging technology, quality stable and reliable Generally can be divided into C wave band single optical iso
More...
[
Product #: 7874]
The in-line variable optical attenuator (VOA) is manually-adjusted, used for precisely balancing the signal strengths in fiber circuits, or balancing an optical signal when evaluating the dynamic range of the measurement system.Key FeaturesHigh Precise attenuation valuePerfect environmental stabilit
More...
[
Product #: 3705]
Multiplexer (MUX) and demultiplexer (DEMUX) are combined together into a single piece of equipment for bi-directional data transmission over two fibers.DWDM Mux/Demux modules are part of a series of high performance products based on silica-on-silicon planar technology. The AWG chips Fiber-MART.Com
More...
[
Product #: 2024]
1x4 Fiber Polarization Maintaining(PM) PLC Splitter Slow Axis with Plastic ABS Box PackagePolarization Maintaining Planar Light wave Circuit (PLC) splitter is a type of polarization maintaining optical power management device that is fabricated using silica optical waveguide technology. PM PLC split
More...
[
Product #: 3079]
This Compact Full Functional High Power Fiber Amplifier Module is a kind of C-Band, high power and full-function optical fiber amplifier module. The key components of the product are high reliability multimode PUMP laser and the double cladding optical fiber. The module has standard RS-232 or RS-485
More...
[
Product #: 6221]
The CWDM-SFP10G-40 series optical transceiver is designed for fiber communications application up to 10G, which fully compliant with the specification of SFP+ MSA SFF-8431.This module is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength. There are eight center wa
More...
[
Product #: 3647]
Fiber-Mart 40GBASE-PLR4 QSFP+ Module supports link lengths of up to 10km over a standard pair of G.652 single-mode fiber with MPO connectors.The 40 Gigabit Ethernet signal is carried over four wavelengths. Multiplexing and demultiplexing of the four wavelengths are managed within the device.It combi
More...
[
Product #: 3345]
40GBASE QSFP+ to eight LC/SC/ST/FC Connector Breakout Active Optical Cable are a high performance, low power consumption, long reach interconnect solution supporting 40G Ethernet, fiber channel and PCIe. It is compliant with the QSFP MSA and IEEE P802.3ba 40GBASE-SR4. QSFP+ Breakout Cable is an asse
More...
[
Product #: 2375]
QSFP+ Active Optical Cable (AOC) is a high performance, low power consumption integrated cable for short-range multi-lane data communication and interconnect applications, supporting 40G Ethernet, fiber channel and PCIE. It is compliant with the QSFP+ MSA and IEEE P802.3ba 40GBASE-SR4. It integrates
More...
[
Product #: 542]
This is a 50/125/900& 181m fiber optic indoor cable, could be used as patch cords and pigtails, could be a interconnection of fiber optic equipment.The fiber is coated with 250& 181m soft plastic, and then covered with a 900& 181m tight buffer thick layer of hard plastic, which add some fiber protec
More...
[
Product #: 116]
FTTH indoor cables are used inside buildings or houses. In the center of the cable is the optical communication unit, with the two parallel non-metical enhanced FRP/Metal/KFRP as the strength member, and surrounded with the LSZH jacket.Indoor use FTTH cables have the same function of the common indo
More...
[
Product #: 2563]
GYTA fiber optic cable is used for duct or aerial applications.These aluminum tape armored cables are suitable for installation for long haul communication and LANs, especially suitable for the situation of high requirements of moisture resistance.It is the stranded loose tube fiber optic cable with
More...
[
Product #: 1241]
The All-Dielectric Self Supporting (ADSS) cable is a completely non-metallic structure in which the tensile load bearing elements are integral within the circular design of the cable.ADSS power optical cable adopts loose tube stranded.Optical fiber are positioned into a loose tube made of high modul
More...
[
Product #: 874]
12 Ports LC Panduit Opticom Compatible Fiber Adapter Panels (FAPs) Compatible with:Panduit Opticom ™ Angled Rack Mount Trays and Fiber Adapter Patch Panels1RU FMT1A with CFAPPBL1A2RU FMT2A with CFAPPBL2AOpticom ™ Standard Rack Mount Trays and Fiber Adapter Patch Panels1 RU FMT1 with CFAPPBL12 RU FMT
More...
[
Product #: 13578]
1x MTP Male to 6x LC/UPC Duplex, 0.35dB IL, Polarity A, 12 Fibers 10G OM3 Laser Optimized MPO/MTP Cassette12 Fibers Elite MTP to LC Duplex MPO/MTP Fiber Optic LGX Cassette, 12 Strands 10G OM3Fiber Count12FibersFiber TypeOM4 MMFFront Connector Type6 LC UPC DuplexRear Connector Type1x MTP MaleMTP Ada
More...
[
Product #: 2838]
The rack mount fiber tray and fiber adapter patch panels shall house, organize, manage and protect fiber optic cable, Fiber-Mart provides a comprehensive line of fiber distribution enclosures that provide a flexible and modular system for managing fiber terminations, connections, and patching in all
More...
[
Product #: 1842]
1x16 Fiber Optical Splitter ABS Terminal Box As Distribution Box FM-CABS-16DFiber-Marts Insert Fiber Optical Splitter Terminal Box belongs to distribution box, it is mainly used Blade Design, and which is equipped with splitter module, PLC splitter and connector. The material of this box is usually
More...