Welcome Guest | |
Submit Your Sourcing Requirement
Advanced Search Filtersdown arrow
Print

Com.It Srl

Company Summary:

  • Since 1995
  • 1-5 Employees
  • Turnover 30,00,000.00 USD per year
  • Limited Company

Additional Contacts:

Export Department
Stefano Biondi
Email: xxxxxxxxxxxxx
Phone: xxx-xxxxxxxxxx
Fax: xxx-xxxxxxxxxx
Website: xxxxxxxxxxxxx

Company Address:

Viale Caduti per la libertà, 4
Monte San Pietro
Italy, 40050
Web Page Link: https://www.toboc.com/comitsrl.aspx
Company Registration Number: IT04233590373

GET A QUOTE

Details of Product or Sell Offer
product

Automatic Wire Mesh Welding Line COM.IT

"Automatic Wire Mesh Welding Line COM.IT" is listed under  Welding WiresCategory

Product DescriptionThe MESH LINE CO240-A line has been devised and manufactured to produce electrowelded wire mesh panels in standard or standardized size for big production lots and to be used for 24 hours a day.It is fed in continuous with line wires by coils while with cross-wires by pre-straightened bars.It is fed with line and cross wires by pre-straightened bars.This wire mesh welding line can work at 140 welds/min.Product FeatureWires fed by coils.COM.IT has developed a new device to automatically feed the magazine loader "ATR" of the welding line called "CO-240-A".The wires are held by two spools placed on rotating reels with pneumatic braking.Towing and straightening are carried out by two straightening machines.The cutting table and the support structure are designed so as to be able to straighten, cut and unload wires with length from 1400 to 2500 mm and a diameter from 3,0 to 10,0 mm.ACW can be installed on new welding lines or in the revamping of existent plants.Product Specification/ModelsSteel structure where the welding transformers (from 6 to 12) and all accessories (lower and upper electrodes, welding presses, position electromagnets and so on) that allow welding of smooth and ribbed wires with diameter from 4,0 to 12,0 mm, are placed.The forwarding movement of the wire mesh is driven by a servo-motor that moves forward a trolley carrying the pneumatic drawing grippers.The operator can set the forwarding movement of the wire mesh (interaxis of the cross-wires) with 0.1 mm increases and guarantee of absolute exactness, from the control console.ApplicationConcrete reinforcement industryWire meshOther InformationPlease visit our website and contact us for more details.



Product Detail

NA
NA
1     Unit(s)
30   day(s)
140   welds/min 
Welding, COM.IT, comit
#Welding, #COM.IT, #comit

View All Products posted by Com.it Srl


You may be interested in.
>