Lab twin screw granulation line / PLC control
"Lab twin screw granulation line / PLC control" is listed under
Other - Plastic MachineryCategory
Lab twin screw granulation line / PLC controlThis lab twin screw granulation line consisted of transmission device, extrusion device, heating and cooling system,electric control system, etc. The labgranulation line appropriate for the mixing processingexperiment of engineering plastics, modified plastics, waste plastics and colormasterbatch etc., suitable for all kinds ofplastic extrusion granulation, plasticizing homogeneous, color proofing,filling modification, etc. Parameters: 1. Double screw extruder Screw diamete F 20 mm Length diameter ratio 1 : 40 Screw speed 0 - 120 rpm Control system PLC system controller Power supply 3?, five lines 2. Cooling water tank Tank material 304 stainless steel bath Fan 0.15 KW silent blow dry fan 3. Granulation deviceStrand quantity 3 strands Cutting length 1 ~ 3 mm cutting tool adjustable Traction speed 1 ~ 30 m/min frequency adjustable Cutting speed 1 ~ 35 kg/h adjustable Motor0.75 KW Features ¦ The screw diameters are 20,25, 30 (optional), and the length diameter ratio is10~30 times can be optional. ¦ The material of the screwand the charging barrel is 40CrNiMo special tool steel which is hard wearresistant and has been processed through nitriding, tempering, chromeplate andsuper-precision grinding. ¦ The twin screw adopts thecompound mode of building block, including the conveying building blockof screw thread, kneading building block, shearbuilding block and remilling etc. The screw suite consisting of these kneadingblocks of different alternate angles and width can meet different shearingforces and mixing effects required by multi materials production and can carryout the craft scheduled combination in accordance with any material. ¦ The twin screw componentcombination has the self clean function like mutual cleaning up etc. athigh-speed rotating, reducing material wastes during the experimental processand saving clean-up time. ¦ The charging barrel isheated by the cast copper heater which is simply maintained and easilyinstalled and costs little heating time high heat rate, ensuring therequired temperature. The charging barrel adopts soft water circulation coolingwith a good cooling effect. ¦ The host machinetransmission box and torque divider are put into one of tight structure, steadyoperation and large torque, appropriate for any output of power of high shearrate. ¦ The dies adopt the quickconnecting loop which makes the fast dismounting, easily connection to thedownstream equipment and time and labor-saving transfer test.
View All Products posted by
Baopin International Precision Instruments Co.,Ltd