sodium naphthalene formaldehyde
"sodium naphthalene formaldehyde" is listed under
Engineering & ConsultingCategory
1.name:SNF-A 2.application:high water reduction 3.high quality and competitive price 4.low dosage FDN is made of naphthalene, sulfonic acid, formalin and alkali, through sulphuration, hydrolyzation, condensation and neutralization reaction. FDN contains no chloride. Thus, it meets the requirements of chemical admixture specifications for concrete: ASTM Designation C 494 as a Type F admixture, GB8076-1997 and GB50119-2003. 1. Appearance: Powder, light brown hollow particle. Liquid, brown-yellow liquid.2. PH Value: 7-9.3. Moisture Content: Powder lt 8 Percent.4. Solid content: Liquid 40 Percent 1772 Percent5. Fineness: Powder 0.315mm residue on sieve lt 15 Percent.6. No chloride salt. No corrosion on steel bars.7. Sodium Sulfate: FDN-A lt 5 Percent (high concentration powder). 8. Liquidity of Cement Paste = 220mm.9. Ratio of Bleeding: = 90 Percent.10. Water Reduction: 15 Percent-25 Percent.11. Air Content: = 3 Percent.12. Temporal Distribution for Setting: Concrete Initial, Final Setting -60-+120min.13. Blend Dosage Range (Normal Condition) FDN-A Liquid 1 Percent~2 Percent. 14. Ratio of Compressive Strength: 1 day 140 Percent-220 Percent. 3 days 130 Percent-200 Percent. 28 days 120 Percent~140 Percent.15. On condition that the collapsibility and Compressive Strength are fixed, concrete can be saved by 10 Percent~20 Percent.3.Performance and usemainly used in concrete construction, so that not only the workability and hydration but also the strength and quality of concrete can be improved. When it is the first time to use this product or the concrete kind is changed, ratio need to be tested according to the material used in the construction, so that the best ratio can be found.1)put this product which’s weight is 0.5-1.2 Percent of concrete’s weight into concrete, 12-25 Percent water can be saved.2) provided water and cement ratio keep the same, if add FDN, the height on which the cement initially collapse can be 10cm higher at least3)if FDN is properly added, the strength of mortar and cement can be enhanced by 40-80 Percent within 3days, 20-60 Percent within 28days. Of course it still works on the strength for long term.4)Provided the strength of cements and slump keep the same, if added FDN water needed can be saved by 10-25 Percent.5)adding FDN can improve the workability and other mechanical characteristics. This can enhance Its ability to resist compression contraction.6)FDN is widely applicable for cements builing,especially for the following: fluid cement, plasticized cement, steamed cement, water-tight cement, water-proof cement, prefabricated cement, prestressed reinforced cement and high strength cement. But the adaptability to different kind of cement is different.Notice: No corrosion to steel bar.1.name:SNF-A 2.application:high water reduction 3.high quality and competitive price 4.low dosage FDN is made of naphthalene, sulfonic acid, formalin and alkali, through sulphuration, hydrolyzation, condensation and neutralization reaction. FDN contains no chloride. Thus, it meets the requirements of chemical admixture specifications for concrete: ASTM Designation C 494 as a Type F admixture, GB8076-1997 and GB50119-2003. 1. Appearance: Powder, light brown hollow particle. Liquid, brown-yellow liquid.2. PH Value: 7-9.3. Moisture Content: Powder lt 8 Percent.4. Solid content: Liquid 40 Percent 1772 Percent5. Fineness: Powder 0.315mm residue on sieve lt 15 Percent.6. No chloride salt. No corrosion on steel bars.7. Sodium Sulfate: FDN-A lt 5 Percent (high concentration powder). 8. Liquidity of Cement Paste = 220mm.9. Ratio of Bleeding: = 90 Percent.10. Water Reduction: 15 Percent-25 Percent.11. Air Content: = 3 Percent.12. Temporal Distribution for Setting: Concrete Initial, Final Setting -60-+120min.13. Blend Dosage Range (Normal Condition) FDN-A Liquid 1 Percent~2 Percent. 14. Ratio of Compressive Strength: 1 day 140 Percent-220 Percent. 3 days 130 Percent-200 Percent. 28 days 120 Percent~140 Percent.15. On condition that the collapsibility and Compressive Strength are fixed, concrete can be saved by 10 Percent~20 Percent.3.Performance and usemainly used in concrete construction, so that not only the workability and hydration but also the strength and quality of concrete can be improved. When it is the first time to use this product or the concrete kind is changed, ratio need to be tested according to the material used in the construction, so that the best ratio can be found.1)put this product which’s weight is 0.5-1.2 Percent of concrete’s weight into concrete, 12-25 Percent water can be saved.2) provided water and cement ratio keep the same, if add FDN, the height on which the cement initially collapse can be 10cm higher at least3)if FDN is properly added, the strength of mortar and cement can be enhanced by 40-80 Percent within 3days, 20-60 Percent within 28days. Of course it still works on the strength for long term.4)Provided the strength of cements and slump keep the same, if added FDN water needed can be saved by 10-25 Percent.5)adding FDN can improve the workability and other mechanical characteristics. This can enhance Its ability to resist compression contraction.6)FDN is widely applicable for cements builing,especially for the following: fluid cement, plasticized cement, steamed cement, water-tight cement, water-proof cement, prefabricated cement, prestressed reinforced cement and high strength cement. But the adaptability to different kind of cement is different.Notice: No corrosion to steel bar.1.name:SNF-A 2.application:high water reduction 3.high quality and competitive price 4.low dosage FDN is made of naphthalene, sulfonic acid, formalin and alkali, through sulphuration, hydrolyzation, condensation and neutralization reaction. FDN contains no chloride. Thus, it meets the requirements of chemical admixture specifications for concrete: ASTM Designation C 494 as a Type F admixture, GB8076-1997 and GB50119-2003. 1. Appearance: Powder, light brown hollow particle. Liquid, brown-yellow liquid.2. PH Value: 7-9.3. Moisture Content: Powder lt 8 Percent.4. Solid content: Liquid 40 Percent 1772 Percent5. Fineness: Powder 0.315mm residue on sieve lt 15 Percent.6. No chloride salt. No corrosion on steel bars.7. Sodium Sulfate: FDN-A lt 5 Percent (high concentration powder). 8. Liquidity of Cement Paste = 220mm.9. Ratio of Bleeding: = 90 Percent.10. Water Reduction: 15 Percent-25 Percent.11. Air Content: = 3 Percent.12. Temporal Distribution for Setting: Concrete Initial, Final Setting -60-+120min.13. Blend Dosage Range (Normal Condition) FDN-A Liquid 1 Percent~2 Percent. 14. Ratio of Compressive Strength: 1 day 140 Percent-220 Percent. 3 days 130 Percent-200 Percent. 28 days 120 Percent~140 Percent.15. On condition that the collapsibility and Compressive Strength are fixed, concrete can be saved by 10 Percent~20 Percent.3.Performance and usemainly used in concrete construction, so that not only the workability and hydration but also the strength and quality of concrete can be improved. When it is the first time to use this product or the concrete kind is changed, ratio need to be tested according to the material used in the construction, so that the best ratio can be found.1)put this product which’s weight is 0.5-1.2 Percent of concrete’s weight into concrete, 12-25 Percent water can be saved.2) provided water and cement ratio keep the same, if add FDN, the height on which the cement initially collapse can be 10cm higher at least3)if FDN is properly added, the strength of mortar and cement can be enhanced by 40-80 Percent within 3days, 20-60 Percent within 28days. Of course it still works on the strength for long term.4)Provided the strength of cements and slump keep the same, if added FDN water needed can be saved by 10-25 Percent.5)adding FDN can improve the workability and other mechanical characteristics. This can enhance Its ability to resist compression contraction.6)FDN is widely applicable for cements builing,especially for the following: fluid cement, plasticized cement, steamed cement, water-tight cement, water-proof cement, prefabricated cement, prestressed reinforced cement and high strength cement. But the adaptability to different kind of cement is different.Notice: No corrosion to steel bar.1.name:SNF-A 2.application:high water reduction 3.high quality and competitive price 4.low dosage FDN is made of naphthalene, sulfonic acid, formalin and alkali, through sulphuration, hydrolyzation, condensation and neutralization reaction. FDN contains no chloride. Thus, it meets the requirements of chemical admixture specifications for concrete: ASTM Designation C 494 as a Type F admixture, GB8076-1997 and GB50119-2003. 1. Appearance: Powder, light brown hollow particle. Liquid, brown-yellow liquid.2. PH Value: 7-9.3. Moisture Content: Powder lt 8 Percent.4. Solid content: Liquid 40 Percent 1772 Percent5. Fineness: Powder 0.315mm residue on sieve lt 15 Percent.6. No chloride salt. No corrosion on steel bars.7. Sodium Sulfate: FDN-A lt 5 Percent (high concentration powder). 8. Liquidity of Cement Paste = 220mm.9. Ratio of Bleeding: = 90 Percent.10. Water Reduction: 15 Percent-25 Percent.11. Air Content: = 3 Percent.12. Temporal Distribution for Setting: Concrete Initial, Final Setting -60-+120min.13. Blend Dosage Range (Normal Condition) FDN-A Liquid 1 Percent~2 Percent. 14. Ratio of Compressive Strength: 1 day 140 Percent-220 Percent. 3 days 130 Percent-200 Percent. 28 days 120 Percent~140 Percent.15. On condition that the collapsibility and Compressive Strength are fixed, concrete can be saved by 10 Percent~20 Percent.3.Performance and usemainly used in concrete construction, so that not only the workability and hydration but also the strength and quality of concrete can be improved. When it is the first time to use this product or the concrete kind is changed, ratio need to be tested according to the material used in the construction, so that the best ratio can be found.1)put this product which’s weight is 0.5-1.2 Percent of concrete’s weight into concrete, 12-25 Percent water can be saved.2) provided water and cement ratio keep the same, if add FDN, the height on which the cement initially collapse can be 10cm higher at least3)if FDN is properly added, the strength of mortar and cement can be enhanced by 40-80 Percent within 3days, 20-60 Percent within 28days. Of course it still works on the strength for long term.4)Provided the strength of cements and slump keep the same, if added FDN water needed can be saved by 10-25 Percent.5)adding FDN can improve the workability and other mechanical characteristics. This can enhance Its ability to resist compression contraction.6)FDN is widely applicable for cements builing,especially for the following: fluid cement, plasticized cement, steamed cement, water-tight cement, water-proof cement, prefabricated cement, prestressed reinforced cement and high strength cement. But the adaptability to different kind of cement is different.Notice: No corrosion to steel bar.1.name:SNF-A 2.application:high water reduction 3.high quality and competitive price 4.low dosage FDN is made of naphthalene, sulfonic acid, formalin and alkali, through sulphuration, hydrolyzation, condensation and neutralization reaction. FDN contains no chloride. Thus, it meets the requirements of chemical admixture specifications for concrete: ASTM Designation C 494 as a Type F admixture, GB8076-1997 and GB50119-2003. 1. Appearance: Powder, light brown hollow particle. Liquid, brown-yellow liquid.2. PH Value: 7-9.3. Moisture Content: Powder lt 8 Percent.4. Solid content: Liquid 40 Percent 1772 Percent5. Fineness: Powder 0.315mm residue on sieve lt 15 Percent.6. No chloride salt. No corrosion on steel bars.7. Sodium Sulfate: FDN-A lt 5 Percent (high concentration powder). 8. Liquidity of Cement Paste = 220mm.9. Ratio of Bleeding: = 90 Percent.10. Water Reduction: 15 Percent-25 Percent.11. Air Content: = 3 Percent.12. Temporal Distribution for Setting: Concrete Initial, Final Setting -60-+120min.13. Blend Dosage Range (Normal Condition) FDN-A Liquid 1 Percent~2 Percent. 14. Ratio of Compressive Strength: 1 day 140 Percent-220 Percent. 3 days 130 Percent-200 Percent. 28 days 120 Percent~140 Percent.15. On condition that the collapsibility and Compressive Strength are fixed, concrete can be saved by 10 Percent~20 Percent.3.Performance and usemainly used in concrete construction, so that not only the workability and hydration but also the strength and quality of concrete can be improved. When it is the first time to use this product or the concrete kind is changed, ratio need to be tested according to the material used in the construction, so that the best ratio can be found.1)put this product which’s weight is 0.5-1.2 Percent of concrete’s weight into concrete, 12-25 Percent water can be saved.2) provided water and cement ratio keep the same, if add FDN, the height on which the cement initially collapse can be 10cm higher at least3)if FDN is properly added, the strength of mortar and cement can be enhanced by 40-80 Percent within 3days, 20-60 Percent within 28days. Of course it still works on the strength for long term.4)Provided the strength of cements and slump keep the same, if added FDN water needed can be saved by 10-25 Percent.5)adding FDN can improve the workability and other mechanical characteristics. This can enhance Its ability to resist compression contraction.6)FDN is widely applicable for cements builing,especially for the following: fluid cement, plasticized cement, steamed cement, water-tight cement, water-proof cement, prefabricated cement, prestressed reinforced cement and high strength cement. But the adaptability to different kind of cement is different.Notice: No corrosion to steel bar.1.name:SNF-A 2.application:high water reduction 3.high quality and competitive price 4.low dosage FDN is made of naphthalene, sulfonic acid, formalin and alkali, through sulphuration, hydrolyzation, condensation and neutralization reaction. FDN contains no chloride. Thus, it meets the requirements of chemical admixture specifications for concrete: ASTM Designation C 494 as a Type F admixture, GB8076-1997 and GB50119-2003. 1. Appearance: Powder, light brown hollow particle. Liquid, brown-yellow liquid.2. PH Value: 7-9.3. Moisture Content: Powder lt 8 Percent.4. Solid content: Liquid 40 Percent 1772 Percent5. Fineness: Powder 0.315mm residue on sieve lt 15 Percent.6. No chloride salt. No corrosion on steel bars.7. Sodium Sulfate: FDN-A lt 5 Percent (high concentration powder). 8. Liquidity of Cement Paste = 220mm.9. Ratio of Bleeding: = 90 Percent.10. Water Reduction: 15 Percent-25 Percent.11. Air Content: = 3 Percent.12. Temporal Distribution for Setting: Concrete Initial, Final Setting -60-+120min.13. Blend Dosage Range (Normal Condition) FDN-A Liquid 1 Percent~2 Percent. 14. Ratio of Compressive Strength: 1 day 140 Percent-220 Percent. 3 days 130 Percent-200 Percent. 28 days 120 Percent~140 Percent.15. On condition that the collapsibility and Compressive Strength are fixed, concrete can be saved by 10 Percent~20 Percent.3.Performance and usemainly used in concrete construction, so that not only the workability and hydration but also the strength and quality of concrete can be improved. When it is the first time to use this product or the concrete kind is changed, ratio need to be tested according to the material used in the construction, so that the best ratio can be found.1)put this product which’s weight is 0.5-1.2 Percent of concrete’s weight into concrete, 12-25 Percent water can be saved.2) provided water and cement ratio keep the same, if add FDN, the height on which the cement initially collapse can be 10cm higher at least3)if FDN is properly added, the strength of mortar and cement can be enhanced by 40-80 Percent within 3days, 20-60 Percent within 28days. Of course it still works on the strength for long term.4)Provided the strength of cements and slump keep the same, if added FDN water needed can be saved by 10-25 Percent.5)adding FDN can improve the workability and other mechanical characteristics. This can enhance Its ability to resist compression contraction.6)FDN is widely applicable for cements builing,especially for the following: fluid cement, plasticized cement, steamed cement, water-tight cement, water-proof cement, prefabricated cement, prestressed reinforced cement and high strength cement. But the adaptability to different kind of cement is different.Notice: No corrosion to steel bar.1.name:SNF-A 2.application:high water reduction 3.high quality and competitive price 4.low dosage FDN is made of naphthalene, sulfonic acid, formalin and alkali, through sulphuration, hydrolyzation, condensation and neutralization reaction. FDN contains no chloride. Thus, it meets the requirements of chemical admixture specifications for concrete: ASTM Designation C 494 as a Type F admixture, GB8076-1997 and GB50119-2003. 1. Appearance: Powder, light brown hollow particle. Liquid, brown-yellow liquid.2. PH Value: 7-9.3. Moisture Content: Powder lt 8 Percent.4. Solid content: Liquid 40 Percent 1772 Percent5. Fineness: Powder 0.315mm residue on sieve lt 15 Percent.6. No chloride salt. No corrosion on steel bars.7. Sodium Sulfate: FDN-A lt 5 Percent (high concentration powder). 8. Liquidity of Cement Paste = 220mm.9. Ratio of Bleeding: = 90 Percent.10. Water Reduction: 15 Percent-25 Percent.11. Air Content: = 3 Percent.12. Temporal Distribution for Setting: Concrete Initial, Final Setting -60-+120min.13. Blend Dosage Range (Normal Condition) FDN-A Liquid 1 Percent~2 Percent. 14. Ratio of Compressive Strength: 1 day 140 Percent-220 Percent. 3 days 130 Percent-200 Percent. 28 days 120 Percent~140 Percent.15. On condition that the collapsibility and Compressive Strength are fixed, concrete can be saved by 10 Percent~20 Percent.3.Performance and usemainly used in concrete construction, so that not only the workability and hydration but also the strength and quality of concrete can be improved. When it is the first time to use this product or the concrete kind is changed, ratio need to be tested according to the material used in the construction, so that the best ratio can be found.1)put this product which’s weight is 0.5-1.2 Percent of concrete’s weight into concrete, 12-25 Percent water can be saved.2) provided water and cement ratio keep the same, if add FDN, the height on which the cement initially collapse can be 10cm higher at least3)if FDN is properly added, the strength of mortar and cement can be enhanced by 40-80 Percent within 3days, 20-60 Percent within 28days. Of course it still works on the strength for long term.4)Provided the strength of cements and slump keep the same, if added FDN water needed can be saved by 10-25 Percent.5)adding FDN can improve the workability and other mechanical characteristics. This can enhance Its ability to resist compression contraction.6)FDN is widely applicable for cements builing,especially for the following: fluid cement, plasticized cement, steamed cement, water-tight cement, water-proof cement, prefabricated cement, prestressed reinforced cement and high strength cement. But the adaptability to different kind of cement is different.Notice: No corrosion to steel bar.1.name:SNF-A 2.application:high water reduction 3.high quality and competitive price 4.low dosage FDN is made of naphthalene, sulfonic acid, formalin and alkali, through sulphuration, hydrolyzation, condensation and neutralization reaction. FDN contains no chloride. Thus, it meets the requirements of chemical admixture specifications for concrete: ASTM Designation C 494 as a Type F admixture, GB8076-1997 and GB50119-2003. 1. Appearance: Powder, light brown hollow particle. Liquid, brown-yellow liquid.2. PH Value: 7-9.3. Moisture Content: Powder lt 8 Percent.4. Solid content: Liquid 40 Percent 1772 Percent5. Fineness: Powder 0.315mm residue on sieve lt 15 Percent.6. No chloride salt. No corrosion on steel bars.7. Sodium Sulfate: FDN-A lt 5 Percent (high concentration powder). 8. Liquidity of Cement Paste = 220mm.9. Ratio of Bleeding: = 90 Percent.10. Water Reduction: 15 Percent-25 Percent.11. Air Content: = 3 Percent.12. Temporal Distribution for Setting: Concrete Initial, Final Setting -60-+120min.13. Blend Dosage Range (Normal Condition) FDN-A Liquid 1 Percent~2 Percent. 14. Ratio of Compressive Strength: 1 day 140 Percent-220 Percent. 3 days 130 Percent-200 Percent. 28 days 120 Percent~140 Percent.15. On condition that the collapsibility and Compressive Strength are fixed, concrete can be saved by 10 Percent~20 Percent.3.Performance and usemainly used in concrete construction, so that not only the workability and hydration but also the strength and quality of concrete can be improved. When it is the first time to use this product or the concrete kind is changed, ratio need to be tested according to the material used in the construction, so that the best ratio can be found.1)put this product which’s weight is 0.5-1.2 Percent of concrete’s weight into concrete, 12-25 Percent water can be saved.2) provided water and cement ratio keep the same, if add FDN, the height on which the cement initially collapse can be 10cm higher at least3)if FDN is properly added, the strength of mortar and cement can be enhanced by 40-80 Percent within 3days, 20-60 Percent within 28days. Of course it still works on the strength for long term.4)Provided the strength of cements and slump keep the same, if added FDN water needed can be saved by 10-25 Percent.5)adding FDN can improve the workability and other mechanical characteristics. This can enhance Its ability to resist compression contraction.6)FDN is widely applicable for cements builing,especially for the following: fluid cement, plasticized cement, steamed cement, water-tight cement, water-proof cement, prefabricated cement, prestressed reinforced cement and high strength cement. But the adaptability to different kind of cement is different.Notice: No corrosion to steel bar.1.name:SNF-A 2.application:high water reduction 3.high quality and competitive price 4.low dosage FDN is made of naphthalene, sulfonic acid, formalin and alkali, through sulphuration, hydrolyzation, condensation and neutralization reaction. FDN contains no chloride. Thus, it meets the requirements of chemical admixture specifications for concrete: ASTM Designation C 494 as a Type F admixture, GB8076-1997 and GB50119-2003. 1. Appearance: Powder, light brown hollow particle. Liquid, brown-yellow liquid.2. PH Value: 7-9.3. Moisture Content: Powder lt 8 Percent.4. Solid content: Liquid 40 Percent 1772 Percent5. Fineness: Powder 0.315mm residue on sieve lt 15 Percent.6. No chloride salt. No corrosion on steel bars.7. Sodium Sulfate: FDN-A lt 5 Percent (high concentration powder). 8. Liquidity of Cement Paste = 220mm.9. Ratio of Bleeding: = 90 Percent.10. Water Reduction: 15 Percent-25 Percent.11. Air Content: = 3 Percent.12. Temporal Distribution for Setting: Concrete Initial, Final Setting -60-+120min.13. Blend Dosage Range (Normal Condition) FDN-A Liquid 1 Percent~2 Percent. 14. Ratio of Compressive Strength: 1 day 140 Percent-220 Percent. 3 days 130 Percent-200 Percent. 28 days 120 Percent~140 Percent.15. On condition that the collapsibility and Compressive Strength are fixed, concrete can be saved by 10 Percent~20 Percent.3.Performance and usemainly used in concrete construction, so that not only the workability and hydration but also the strength and quality of concrete can be improved. When it is the first time to use this product or the concrete kind is changed, ratio need to be tested according to the material used in the construction, so that the best ratio can be found.1)put this product which’s weight is 0.5-1.2 Percent of concrete’s weight into concrete, 12-25 Percent water can be saved.2) provided water and cement ratio keep the same, if add FDN, the height on which the cement initially collapse can be 10cm higher at least3)if FDN is properly added, the strength of mortar and cement can be enhanced by 40-80 Percent within 3days, 20-60 Percent within 28days. Of course it still works on the strength for long term.4)Provided the strength of cements and slump keep the same, if added FDN water needed can be saved by 10-25 Percent.5)adding FDN can improve the workability and other mechanical characteristics. This can enhance Its ability to resist compression contraction.6)FDN is widely applicable for cements builing,especially for the following: fluid cement, plasticized cement, steamed cement, water-tight cement, water-proof cement, prefabricated cement, prestressed reinforced cement and high strength cement. But the adaptability to different kind of cement is different.Notice: No corrosion to steel bar.1.name:SNF-A 2.application:high water reduction 3.high quality and competitive price 4.low dosage FDN is made of naphthalene, sulfonic acid, formalin and alkali, through sulphuration, hydrolyzation, condensation and neutralization reaction. FDN contains no chloride. Thus, it meets the requirements of chemical admixture specifications for concrete: ASTM Designation C 494 as a Type F admixture, GB8076-1997 and GB50119-2003. 1. Appearance: Powder, light brown hollow particle. Liquid, brown-yellow liquid.2. PH Value: 7-9.3. Moisture Content: Powder lt 8 Percent.4. Solid content: Liquid 40 Percent 1772 Percent5. Fineness: Powder 0.315mm residue on sieve lt 15 Percent.6. No chloride salt. No corrosion on steel bars.7. Sodium Sulfate: FDN-A lt 5 Percent (high concentration powder). 8. Liquidity of Cement Paste = 220mm.9. Ratio of Bleeding: = 90 Percent.10. Water Reduction: 15 Percent-25 Percent.11. Air Content: = 3 Percent.12. Temporal Distribution for Setting: Concrete Initial, Final Setting -60-+120min.13. Blend Dosage Range (Normal Condition) FDN-A Liquid 1 Percent~2 Percent. 14. Ratio of Compressive Strength: 1 day 140 Percent-220 Percent. 3 days 130 Percent-200 Percent. 28 days 120 Percent~140 Percent.15. On condition that the collapsibility and Compressive Strength are fixed, concrete can be saved by 10 Percent~20 Percent.3.Performance and usemainly used in concrete construction, so that not only the workability and hydration but also the strength and quality of concrete can be improved. When it is the first time to use this product or the concrete kind is changed, ratio need to be tested according to the material used in the construction, so that the best ratio can be found.1)put this product which’s weight is 0.5-1.2 Percent of concrete’s weight into concrete, 12-25 Percent water can be saved.2) provided water and cement ratio keep the same, if add FDN, the height on which the cement initially collapse can be 10cm higher at least3)if FDN is properly added, the strength of mortar and cement can be enhanced by 40-80 Percent within 3days, 20-60 Percent within 28days. Of course it still works on the strength for long term.4)Provided the strength of cements and slump keep the same, if added FDN water needed can be saved by 10-25 Percent.5)adding FDN can improve the workability and other mechanical characteristics. This can enhance Its ability to resist compression contraction.6)FDN is widely applicable for cements builing,especially for the following: fluid cement, plasticized cement, steamed cement, water-tight cement, water-proof cement, prefabricated cement, prestressed reinforced cement and high strength cement. But the adaptability to different kind of cement is different.Notice: No corrosion to steel bar.1.name:SNF-A 2.application:high water reduction 3.high quality and competitive price 4.low dosage FDN is made of naphthalene, sulfonic acid, formalin and alkali, through sulphuration, hydrolyzation, condensation and neutralization reaction. FDN contains no chloride. Thus, it meets the requirements of chemical admixture specifications for concrete: ASTM Designation C 494 as a Type F admixture, GB8076-1997 and GB50119-2003. 1. Appearance: Powder, light brown hollow particle. Liquid, brown-yellow liquid.2. PH Value: 7-9.3. Moisture Content: Powder lt 8 Percent.4. Solid content: Liquid 40 Percent 1772 Percent5. Fineness: Powder 0.315mm residue on sieve lt 15 Percent.6. No chloride salt. No corrosion on steel bars.7. Sodium Sulfate: FDN-A lt 5 Percent (high concentration powder). 8. Liquidity of Cement Paste = 220mm.9. Ratio of Bleeding: = 90 Percent.10. Water Reduction: 15 Percent-25 Percent.11. Air Content: = 3 Percent.12. Temporal Distribution for Setting: Concrete Initial, Final Setting -60-+120min.13. Blend Dosage Range (Normal Condition) FDN-A Liquid 1 Percent~2 Percent. 14. Ratio of Compressive Strength: 1 day 140 Percent-220 Percent. 3 days 130 Percent-200 Percent. 28 days 120 Percent~140 Percent.15. On condition that the collapsibility and Compressive Strength are fixed, concrete can be saved by 10 Percent~20 Percent.3.Performance and usemainly used in concrete construction, so that not only the workability and hydration but also the strength and quality of concrete can be improved. When it is the first time to use this product or the concrete kind is changed, ratio need to be tested according to the material used in the construction, so that the best ratio can be found.1)put this product which’s weight is 0.5-1.2 Percent of concrete’s weight into concrete, 12-25 Percent water can be saved.2) provided water and cement ratio keep the same, if add FDN, the height on which the cement initially collapse can be 10cm higher at least3)if FDN is properly added, the strength of mortar and cement can be enhanced by 40-80 Percent within 3days, 20-60 Percent within 28days. Of course it still works on the strength for long term.4)Provided the strength of cements and slump keep the same, if added FDN water needed can be saved by 10-25 Percent.5)adding FDN can improve the workability and other mechanical characteristics. This can enhance Its ability to resist compression contraction.6)FDN is widely applicable for cements builing,especially for the following: fluid cement, plasticized cement, steamed cement, water-tight cement, water-proof cement, prefabricated cement, prestressed reinforced cement and high strength cement. But the adaptability to different kind of cement is different.Notice: No corrosion to steel bar.1.name:SNF-A 2.application:high water reduction 3.high quality and competitive price 4.low dosage FDN is made of naphthalene, sulfonic acid, formalin and alkali, through sulphuration, hydrolyzation, condensation and neutralization reaction. FDN contains no chloride. Thus, it meets the requirements of chemical admixture specifications for concrete: ASTM Designation C 494 as a Type F admixture, GB8076-1997 and GB50119-2003. 1. Appearance: Powder, light brown hollow particle. Liquid, brown-yellow liquid.2. PH Value: 7-9.3. Moisture Content: Powder lt 8 Percent.4. Solid content: Liquid 40 Percent 1772 Percent5. Fineness: Powder 0.315mm residue on sieve lt 15 Percent.6. No chloride salt. No corrosion on steel bars.7. Sodium Sulfate: FDN-A lt 5 Percent (high concentration powder). 8. Liquidity of Cement Paste = 220mm.9. Ratio of Bleeding: = 90 Percent.10. Water Reduction: 15 Percent-25 Percent.11. Air Content: = 3 Percent.12. Temporal Distribution for Setting: Concrete Initial, Final Setting -60-+120min.13. Blend Dosage Range (Normal Condition) FDN-A Liquid 1 Percent~2 Percent. 14. Ratio of Compressive Strength: 1 day 140 Percent-220 Percent. 3 days 130 Percent-200 Percent. 28 days 120 Percent~140 Percent.15. On condition that the collapsibility and Compressive Strength are fixed, concrete can be saved by 10 Percent~20 Percent.3.Performance and usemainly used in concrete construction, so that not only the workability and hydration but also the strength and quality of concrete can be improved. When it is the first time to use this product or the concrete kind is changed, ratio need to be tested according to the material used in the construction, so that the best ratio can be found.1)put this product which’s weight is 0.5-1.2 Percent of concrete’s weight into concrete, 12-25 Percent water can be saved.2) provided water and cement ratio keep the same, if add FDN, the height on which the cement initially collapse can be 10cm higher at least3)if FDN is properly added, the strength of mortar and cement can be enhanced by 40-80 Percent within 3days, 20-60 Percent within 28days. Of course it still works on the strength for long term.4)Provided the strength of cements and slump keep the same, if added FDN water needed can be saved by 10-25 Percent.5)adding FDN can improve the workability and other mechanical characteristics. This can enhance Its ability to resist compression contraction.6)FDN is widely applicable for cements builing,especially for the following: fluid cement, plasticized cement, steamed cement, water-tight cement, water-proof cement, prefabricated cement, prestressed reinforced cement and high strength cement. But the adaptability to different kind of cement is different.Notice: No corrosion to steel bar.
View All Products posted by
WEIFANG ENTACHEM CO.,LTD