www.techwac.comExport DepartmentChloe LeePhone: +86 - 1581405089 - /+86 - 15814050894Fax: +86 - 15 - 81405089
shi Duo Ji Zhan Feng Industrial Pack Hang Cheng Zone Bao'an District China ShenzhenShenzhen, ShenzhenChina, 51800Web Page Link: http://www.toboc.com/techwactechnology
gsm terminal use as backup for pstn in the alarm system with built in alarm inputs allow the gt-100 unit to send (ademco id) additional signals to cms monitoring station. alarm backup system with built in 3 inputs and 3 outputs
the new gt-100 gsm terminal is a wireless communicator for alarm, fire panels that uses the cell network (gsm) to transmit alarm and other panel event. the module check the status of the pstn line and in case the pstn line become unavailable, the gt-100 gsm emulate the line signal to the panel. at this time, the panel will dial out using the gsm cell network to communicate with the receive at the cms station and transmit the reports. gt-100 also has built in alarm inputs allow the gt-100 unit to send (ademco id) additional signals to cms monitoring station. gt-100 offer a number of solutions to open gates by a simple call. just dial a number to open your gates. gt-100 user list of numbers who are enabled to open the , up to 100.
-allows any id alarm to transmit alarms over gsm using the gsm voice channel.
-work over the gsm cell networks units can be used wherever there is cell coverage.
-gt-100 uses the tele line as the main transmission line and uses the gsm voice channel as backup.
-gt-100 has built-in alarm inputs that allow the unit to send (ademco id) additional signals to cms monitoring station.
-three open collector outputs (that can sink max 300ma per output) can be turned on and off remotely through a sms or call.
-programmable cell number to notify the user that the pstn line has been cut off or unavailable.
-gt-100 offer a number of solutions to open gates by a simple call. just dial a number to open your gates.
-gt-100 user list of numbers who are enabled to open the , up to 100.
-programmable 5 administrator/cms number
-programmable recipient that will receive alert messages
-programmable area code
-programmable the dialing time
-programmable clock setting
-programmable account number for cms
-programmable auto test report time section up to 3 sections
-programmable sending reports to cms
-programmable generation of sms report for auto test
-programmable for pstn send sms failure
-programmable for pstn sending report to cms (failure) and connected
-programmable for ac failure sending report to cms or sms to admin number
-programmable inputs failed or connected sending reports to cms or admin numbers
-programmable enable/disable system power up sms notification
-programmable ignore the front dialing digits when dialing the administrator or cms number
-programmable adjusting the speaker and micro volume level
-programmable editing the inputs alert messages (detecting 5~12vdc triggered)
-programmable editing the input alert message for (detecting 0 vdc triggered)
-programmable editing the outputs (open) alert messages
-programmable editing the outputs (closed) alert messages
-programmable activate outputs to stay on for a specific time
-programmable activate the outputs relay to stay on
-programmable activate the outputs relay number when inputs triggered
-programmable user list to trip the outputs 1, 2, 3 (user list number is up to 100 numbers)
-programmable output pulse time via sms
-programmable reset to factory default via sms
-programmable checking the signal strength via sms
-programmable inquire the all status
-programmable checking the current time status via sms
View All Products posted by