www.kerter.cnExport DepartmentHebe XiePhone: 86 - 755 - 36690018/86 - 13602582064Fax: 86 - 755 - 36690019
9/F, Building 8, Zhongyuntai Sci-Tech. Industrial Park, Tangtou 1st Rd., Shiyan, BaoanShenzhen, GuangdongChina, 518108Web Page Link: http://www.toboc.com/shenzhenkerterwatertreatmenttechnologycoltd
1. Application The pump is designed for residential RO system with source water pressure being 0.1Mpa ~0.4Mpa to increase the inlet water pressure. 2. FeaturesKeeping high water pressure stably for a long time, low power, high water flow, low noise, etc. 3. Naming ruleKT-PU-0CapacitySeriesBrand nameE. G.: KT_PU_50GThe brand of this pump is KT. The series of this pump is diaphragm self-priming pump. The pump is designed for residential 50G RO system. 4. Service conditions4.1 Ambient conditions: Temperature: 4~40. Relative humidity: Less than 90 Percent(25)4.2 Limited conditions of inlet water4.2. 1 Source water: Municiplal tap water or other municipal central water4.2. 2 Inlet water pressure: 0.1Mpa ~0.4Mpa4.2. 3 Inlet water temperature: 5~384.3 Power supplyVoltage: (24± 0.5)V DC4.4 Working machanismIntermittent work, reasonably working less than 6 hours per day5. Type of coolingNatural cooling6. Main test conditions and acceptance parametersWorking voltage: 24VDC Inlet water pressure: 20PSI Normal working pressure: 70PSI Working water flow under normal working pressure: No less than 48L/H Working current under normal working pressure: No more than 1.0A Closed pressure under 20PSI inlet pressure: 130PSI Max current(under 140PSI): No more than 1.3A Temperature of the motor surface after 24 hours continuous working: No more than 50 Noise: No more than 50dB. 7. Appearance and dimensionNotice: 1. The figure is for reference only. Actual size will be subject to specific product. 2. Inlet and outlet size: 3/8 " pipe thread3. The length of the power line is 40MM 4. All dimensions are in millimeters. 8. Performance curve9. Notes1. The pump head must be downwards or flatwise to avoid water leaking into the rotor. 2. A water filter (no less than 100 mesh) must be equipped to avoiding the particulate matter entering into the pump to effect the performance of the pump. 3. The pump is tested stricly before delivery. Please do not disassemble it without our technician. 4. The medium cant be grease, chemical liquids. The pump cant work in corrosive gases. 5. Wrranty will not apply to the case that damage caused by failing to observe the above items or tearing up the seal artificially. 6. The warranty period is 12 months from the release date. Declaration: 1. This specification applies to booster pump KT-PU-75G only. 2. The users should choose the suitable product according their request. Any inquiry, please contact with for more technical support.
View All Products posted by
Shenzhen Kerter Water Treatment Technology Co. ltd