http://www.saking.com.cnExport Departmenthuang tingfangPhone: +86 - 21 - 65613226/+86 - 13764693489Fax: +86 - 21 - 65176004
Rm 205,Hongye Building NO1, 515 South xinshi Road. Hongkou District, Shanghai,200434
shanghai, shanghaiChina, 200434Web Page Link: http://www.toboc.com/shanghaisakinggroutingsystemltd
Cement based grouting products are suitable for different fixing and bedding applications as machinery bases, bearing plates, steel frames, etc.
DMARGrout-618 is a cement based grout composed of sand, concrete additives and other materials. It can be used after adding some water and mixing around. It represents performance like flowable, tiny expansion, non-isolation and high strength etc.
Uses: DMARGrout-618 is suitable for the following grouting works:
1.The secondary grouting between ground bolt and machine base of large-scale equipments and precise equipments.
2.The secondary grouting of joint between steel structure and concrete.
3.Anchor the steel bar.
4.Filling and fixing of the contrary-striking constitution joints of the underground works.
5.The secondary reinforcement of girder and column.
6.Rush repair the part of roads.
Grain size residue on 4.75mm square mesh sieve / Percent =2.0
Setting time Initial setting time/ min =120
Bleeding rate / Percent =1.0
Fluidity /mm Initial fluidity =260
Fluidity at 30min =230
Compressive strength / Mpa 1d
Linear expansivity / Percent 1d
bond strength(round steel)/Mpa 28d
rustiness effect on reinforcing steel bar no rustiness effect
View All Products posted by
Shanghai Saking Grouting System Ltd