BZC-600 Truck Mounted Drilling Rg
"BZC-600 Truck Mounted Drilling Rg" is listed under
Construction Machinery ToolsCategory
Large torque rotary table allows this truck mounted drilling rig to make a hole quickly. In addition to typical water well drilling application, the rotary drilling rig is also ideal for use in oil fields and the construction of building foundations, brid ge foundations, dam and port foundations, and more.
1. This is a rotary drilling rig independently developed by us. It is designed to drill water wells, industrial wells, and pile holes for building foundation construction.
2 . Re liable chassis
This vehicle mounted drilling rig comes with SINOTRUK special vehicle chassis, and the main driving system, transfer case, transmission box, dual-winch, slurry pump, sand pump, and drill tower, etc. are all mounted on the chassis.
3 . BZ C-350A truck mounted drilling rig is mechanically driven primarily, and the drilling stem comes in screw connection and flange connection types. The screw connected stem is 5 times efficient than the flange connected type as a result of its un ique d esign. This also ensures simple operation and fast hole-making.
4. Directional and reverse circulation
BZC-350A drilling rig is equipped with both mud pump and sand pump. The brake valve of the sand pump is pneumatically controlled, and the slurry s erves as the drilling fluid. Alternative operation of the sand pump and the slurry pump allows the vehicle mounted drilling machine to achieve directional circulation drilling and reverse circulation drilling.
5. Hydraulic system provides th e drilling equipment with superior flexibility.
The four support legs and the drill tower are all hydraulically controlled. Two rear-legs are horizontally extendable. Moreover, the 4 legs can be controlled and adjusted either independently or simult aneously, wh ich allows o perators to level the truck mounted drilling rig quickly and also increases the equipment flexibility.
6. Power system
Automobile engine is adopted to supply power to the drill rig. Transfer case and hydraulic system are als o adopted, whi ch makes sure that the truck and the drilling system can work simultaneously.
7. Special configurations
The truck mounted drilling rig is equipped with MF15KW generator set which provides convenience for equipment operation and maint enance at night.
It is also eq uipped with 7.5KW vacuum pump to assist in supplying water source to 6BS and 8BS sand pumps.
Special devices are also available to increase the drilling pressure when necessary. Thus, the drilling rigs are able to dri ll into hard mud r ock and strongly w heathered soils, and more.
Drilling depth (M) 50 150
Borehole diameter (mm) 1500 500
Rotary table speed (r/min) 122.3 79.5 49.9 28.3 16.7 15.9 (reverse)
Rotary table torqu e (KN.m) 7.4 11.4 18.3 31.9 54.1 56 .8 (reverse)
Pull force of the main winch (with single winch rope) (KN) 30
Max. pull force of the main winch (KN) 180
Pull force of the auxiliary hydraulic winch (with single winch rope) (KN) 40
Max. pul l force of the auxilia ry hydraulic winch (KN ) 160
Elevating capacity of the hook (KN) 180
Carrying capacity of the drill tower (KN) 200
Drill tower height (mm) 9543
Drill stem Main drill stem (mm) 182*182*5000
Second drill stem (mm) ?168*8*3 000 (screw connected)
Hydraulic oil pump Model CB-HP50/32Z
Capacity (ml/r) 50/32
Rated speed (r/min) 2000
Rated pressure (MPa) 20
Slurry pump Flow rate (m 179/h) 200
Max. suction lift (m) 26
Total head (m) 7.5
Speed (r/min) 1450
Po wer (KW) 30
Sand pump 6B S sand pump Flow rate (m 179/h) 280
Max. suction lift (m) 7.5
Total head (m) 18
Speed (r/min) 730
Power (KW) 30
Matching power unit Diesel engine Model CA6DE3-20E3 Euro III
Rated power (KW) 147
Speed (r/min) 2 300
Max. torque 730
Chas sis Model TAZ5183TZJ (Truck crane chassis)
Drive type 6 2154
Driving cab SINOTRUK Golden Prince panoramic cab
||100 Sets Monthly
||drill rig, drill machine, drilling rig
||#drillrig, #drillmachine, #drillingrig
View All Products posted by
Shandong Binzhou Drilling Rigs Factory