Welcome Guest | |
Live Chat
Call Back
Submit Your Sourcing Requirement
Advanced Search Filtersdown arrow

Remix Steel Fiber Co., Ltd.

Company Summary:

  • Since 1998
  • 401-500 Employees
  • Turnover 3,000,000.00 USD per year
  • 60% turn over from existing products
  • 60 year(s) of Export Experience
  • Limited Company

Additional Contacts:

Export Department
chen huadong
Phone: +86 - 318 - 21456985/+86 - 18730810389
Fax: +86 - 318 - 21456985

Company Address:

Jixian County, Hengshui City, Hebei Province, China
hengshui, hebei
China, 053000
Web Page Link: http://www.toboc.com/remixsteelfibercoltd


Listing 1 to 6 of 6 result(s)
Display Per Page: 

Round Crimped Steel Fiber   

Round crimped steel fiber is a new type of reinforced fiber. It is fabricated by cold-drawn low carbon steel wire which conforming to EN 4889-1 Type 1 and ASTM A820/A820M-04 Type 1. Corrugated profile adds pull-out resistance compared with rebar, which is increasingly replaced by steel fibers.


Melt Extract Stainless Steel Fiber   

When fully annealed, melt extract stainless steel fibers are more pliable and ductile. They not only allow for more user-friendly than the stiff cut fibers, but also have better flow features. It is especially characterized by thermal shock resistance, steep thermal gradients resistance and mechanic


Glued Steel Fiber   

Glued steel fiber refers to loose hooked end fibres glued together in a row way (shown as below figure). The big difference between loose and glued fibers is that the former is easy to block together and the latter is easy to disperse uniformly.


Hooked End Steel Fiber   

Cold-drawn hooked end steel fiber is manufactured by quality base steel bar, which has excellent mechanical properties including high tensile strength. Hence, the average tensile strength of the reinforced fibre surpasses 1100 MPa. Owing to high strength and uniform distribution of fibers, stresses


Flat End Fiber   

Flat end steel fibers are cold-drawn steel fibers with high tensile strength up to 1150 MPa. Special design of flat end provides optimum anchorage within the concrete mix rather than relying on the friction between concrete and steel. Flattened end steel fibres are ideal for shotcrete and precast ap


Flat Crimped Steel Fiber   

Flat crimped steel fiber are manufactured by milling steel ingots. Compated with other steel fibers, its tensile strength is a little lower, about 600 Mpa. To achieve the same performance, the percentage of steel fibers should increases.


Listing 1 to 6 of 6 result(s)
Display Per Page: