www.ceratek.netExport Departmentjack chenPhone: +86 - 21 - 33876960/+86 - Fax: +86 - 21 - Show more contact information
Room 603,Building E,PuFa Square,No 1715,
North Zhongshan Rd,Putuo Area,Shanghai,ChinashanghaiChinaWeb Page Link: http://www.toboc.com/ceratektechnicalceramiccolimited
Material for alumina ceramic substrate:95-99 AluminaApplication: widely used in the electronics industry thick-film circuit, large-scale integrated circuits, mixed IC, semiconductor packaging, chip resistors, network resistors, focus potentiometer, power module, power hybrid circuit and other relat
all international standard welding and shot blasting nozzles, such as 10N, 13N, 53N, 54N and 57N series.Features of Alumina Ceramic Nozzle for TIG welding and sand blast:1.Standard scerw 2.High-heat resistant 3.Thermal shock resistant4.Acid-proof, Alkali-proof5.Electrical insulation6.Fine surface 7.
Made by special way,the density is higherMade by special material of 95% alumina,in this way,the heat treatment is betterPrecise Mold control so that the tolerance is strictTechnical data for alumina ceramic beadsDensity 3.65g/cm3Alumina content 95%Hardness(Mohs) 9Rockwell hardness(HRA) over 75Compr
Ceramic-Rubber compound lining plate as wear resistant lining is compounded by high alumina ceramics and excellent natural rubber through special process. The excellent damping performance of natural rubber greatly lowers the noise generated in the transportation, which fully settled a series of iss
Zirconia ceramic Watchcase and watchbandZirconia ceramic has high toughness,high fracture resistant,good chemical resistance,high bending strength,high wear resistance,the coefficient of thermal expansion is close to steel,it is widely used in structure ceramic areas.
Adhere one layer of metal film to the ceramic surface,in order to carry out the welding between ceramic and metal.The material of ceramic part is alumina,forming methods are dry press and CIPProduct size is precise,little warpjoint strength between metal and ceramics is highthe joint area is close.I
Silicon nitride(Si3N4) offers one of the best combinations of toughness and hardness of commercially available technical ceramics. In addition, its low thermal expansion coefficient offers superb thermal shock resistant compared with most other ceramics. Complex geometries can be made with sintered
structure ceramic ball valves are low-cost, long lasting , extra resistant to corrosion,high temperature, wear,erosion etc.it can be widely used in coal limestone fly ash salt k in pulp ferric chloride titanium dioxide chromic acid chlorinesulfite crystals sludge acetic acid and bromine.. structure