Belt strength(ST-NO.) ST-630 ~ ST-5400 Belt width(mm) 600 ~ 2600 We bring high performance steel cord conveyor belts which are widely used in high strength, long distance and heavy load transportation of materials, and also in short distance transportation of materials on special occasions. Characteristics High tensile strength: Belts suitable for large span, long distance transportation of materials. Small elongation in use: A very short take-up stroke distance. Small diameter of drive pulley: It has a layer of longitudinal steel cords as its skeleton, hence it is resistant to flex fatigue. Therefore, a drive pulley of smaller diameter can be used to make the equipment smaller. High adhesion between rubber and steel cord: Its steel cords are zinc coated and the rubber used gives good adhesion with steel cords. Therefore, the rubber is tightly adhered to the steel cords for shock resistance and longer life. Even tension of steel cords: We use advanced techniques in manufacturing hence the steel cords are evenly arranged and have the same tension. Belts are well balanced in running and difficult to run awry. Good trough ability: Our belt body has no transverse skeleton, it is easy to from a deep trough, so the belts can load more materials and prevent the materials from escaping. Inspection of the belt with X-rays: Users can use X-rays to inspect damages of the skeleton steel cords on the conveyor machines to prevent accidents from happening.