Products
Sell ACTIVATED ZINC OXIDE
[
Product #: HSCODE: 28170000]
A-100
Activator for general using.
Manufacture Facilities: Eva soles, rubber based
hose, doormat, engine wedge, gasket, blowers.
It creates positive effects for outputs produced by
press machine.
ANALYSIS
ACTIVE MATERIAL %98.5 min.
HUMIDITY (105°C) %1.5 max
BULK DENSITY 0,46 gr/cm3min.
pH 7,2±0,1
SURFACE AREA 20 m2/gr min.
Mesh 325 %0,4 max.
Pb 10 ppm max
Cd 10 ppm max
Cu 10 ppm max
A-200
It's used in manufacturing of conveyer strips,
electric cables, floor coverings, blowers, gaskets,
and hoses of washing machines and dish washers. It
is used in salt bath and extrusion products as well
ANALYSIS
ACTIVE MATERIAL %98.5 min.
HEATING LOSS 500°C %1.5 max.
BULK DENSITY 0,48 gr/cm3min.
pH 7,2±0,2
SURFACE AREA 28 m2/gr min.
Mesh 325 %0,4 max.
Pb 10 ppm max
Cd 10 ppm max
Cu 10 ppm max
A-250
It's mostly used in automobile and bicycle tyre
production in automotive industry. Its fine grain
structure and large surface area enable it to be
used at the same amounts with zinc oxide.
ANALYSIS
ACTIVE MATERIAL %98.5 min.
ZINC OXIDE (ZnO) % 55 min.
HUMIDITY (105°C) %1.5 max
BULK DENSITY 0,43±0.01gr/cm3
SURFACE AREA 35 m2/gr min.
Mesh 325 %0,4 max.
Pb 10 ppm max
Cd 20 ppm max
Cu 10 ppm max
A-275
For general use in rubber industry.
It's recommended to be used in extrusion
machinery. With its fine grain structure and high
surface area, it enables 25% saving compared to
zinc oxide.
ANALYSIS
ACTIVE MATERIAL %97min.
ZINC OXIDE (ZnO) % 62 min.
HEATING LOSS 500°C %3max.
SURFACE AREA 50m2/gr min.
BULK DENSITY 0,46±0.01m3
pH 7,2±0,2
Mesh 325 %0,4 max.
Pb 10 ppm max
Cd 2 ppm max
Cu 10 ppm max
A-300
Zinc carbonate. Zinc oxide proportion is 72%± 2
Creates perfect results in transparent, light
colored products, sole, automobile tyre and
sensitive components manufacturing.
It's used 20% less than regular zinc oxide.
ANALYSIS
ACTIVE MATERIAL %98 min.
ZINC OXIDE %72± 2
BULK DENSITY 0,54 gr/cm3min.
pH 7,2±0,2
SURFACE AREA 30-45 m2/gr
Mesh 325 % 1max.
Pb 10 ppm max
Cd 10 ppm max
Cu 10 ppm max
A-400
Zinc oxide proportion is 92+2.
Automotive: Absorbent heating and radiator hoses,
door and window profiles, wipers.
White Goods: Blower, gasket, hose.
Electricity: Cable manufacturing.
Construction Area: Door and window profiles, roof
and floor covering materials.
It's used in every area in which zinc oxide is used.
It is, economically, 50% more advantageous than
zinc oxide. It can be used in all kind of rubbers
ANALYSIS
ZINC OXIDE %92+2
HEATING LOSS 800°C %5max
SURFACE AREA 45-60 m2/gr
BULK DENSITY 0,45 gr/cm3
ELECT. CONDUCTIVITY 0.95 ms/cm
Mesh 325 %1max.
Pb 10 ppm max
Cd 10 ppm max
Cu 10 ppm max
View All Products posted by
MELOS A.S
