This Company is registered for the sectors listed below:
Click on the above sub-sectors to see other companies registered under the same
sub-sector.
|
|
Sell SAT-1CS Transmission analyzer [Product #: 080311]
1550.00 USD [US Dollars] [1pc]
Major Features
• LCD large-screen display, 320*240 lattice, backlight, LED indicator
• Hand held, auto configuration
• Multi-task operation at one time
• Store 20 test results and 9 test configurations, with power-off memories
• PC operation, store, analysis, print
• Programmable timer
• Alarm and histogram analysis
• Software updating
Major Functions
For 2Mbit/s:
• Service-interrupted error testing
• Online error testing
• Framed and unframed signals generation and reception
• 2Mbit/s unframed error performance testing
• 2Mbit/s framed N×64kbit/s channel error testing
• Bit error, coding error, frame error, CRC error and E bit error testing
• Signal loss alarm, AIS alarm, framed remote alarm, multi-framed remote alarm, out-of-frame, and pattern loss alarm
• Frequency offset testing
• Line signal level and frequency testing
• Voice channel signal level and frequency testing
• Pattern slip testing
• Clock slip testing
• Straightforward signaling
• Audio frequency testing
• Loop circuit delay testing
• Automatic protection switching time testing (APS)
• Clock bias function
• Sound monitoring
• Duplex 2Mbit/s detecting and monitoring
• Signal state display. Voice channel content display. Voice channel busy indication
• Alarm and error histogram analysis
• Time slot content analysis, drop and insert signal on each time slot
• Framed content analysis
• G.703 module analysis
• G. 821/G. 826/M. 2100 error analysis
• Multi error and alarm inserting
• Three input modes (terminating, bridging and monitoring)
• Three clock options (internal, external and picking-up);
For Datacom:
• V.24/RS232/V.28, V.35, V.36, X.21, RS-449, RS-485, RS422, EIA-530, EIA-530A datacom testing
• SYNCH and ASYNCH testing
• DTE and DCE emulation
• Bit code testing
• Pattern slip testing
• Signal loss alarm
• Line signal level and frequency testing
• Loop delay testing
• Automatic protection switching time testing(APS)
• G.821, M2100 service interrupt error testing
For co-directional 64Kbit/s:
• Service interrupt error testing
• Bit code testing
• Pattern slip testing
• Signal loss, AIS alarm
• Line signal frequency testing
• Loop delay testing
• Automatic protection switching time testing(APS)
• G.821, M.2100 error testing
Technical Index
• 2Mbit/s Technical Index
(1) Signal input rate: 2048kbit/s ? 100ppm (G.703 requirement±50PPM)
(2) Signal code: HDB3, AMI.
(3) Input jitter tolerance: Up to the requirement of Figure 10.1.
Fig.10.1 Input Jitter Tolerance
(4) Input balance response: attenuation complies with the law of square root of frequency, and is within the range of 0 to 6dB at 1024 kHz.
(5) Input Impedance
(5.1) Unbalance terminating: 75?
Balance terminating: 120?
Reflection loss >18dB within 50Hz~3100kHz
(5.2) Unbalance bridging: >750?
Balance bridging: >1200?
(5.3) Unbalance monitoring: 75?, 26dB gain
Balance monitoring: 120?, 26dB gain
Reflection loss >18dB within 50Hz~3100kHz
(6) Signal structure
(6.1) Unframed structure
(6.2) Framed structure: PCM30, PCM31, PCM30CRC, PCM31CRC
Framed structure complies with the requirement of G. 704
(7) Testing pattern: 26-1, 29-1, 211-1, 215-1, 220-1, 223-1, and artificial code
(8) Impedance of output interface:
(8.1) Unbalance 75?, up to G. 703
(8.2) Balance 120?, up to G. 703
(9) External clock input
(9.1) Signal form: HDB3, NRZ
(9.2) Balance terminating resistance: 120?
Unbalance terminating resistance: 75?
Balance bridging resistance: >1200?
Unbalance bridging resistance: >750?
(10) Error code insertion: None, single, or ratio 10-1~10-7.
• Co-directional 64k Technical Index
(1) Signal input rate: 64kbit/s ? 100ppm(G.703 requirement±100PPM)
(2) Input impedance: Balance 120?, up to G.703
(3) Input jitter tolerance: Up to G.823.
(4) Impedance of output interface: Balance 120?, up to G.703
(5) Testing pattern: 26-1, 29-1, 211-1, 215-1, 220-1, 223-1, and artificial code
• Datacom Index
(1) Data interface type: V.24, V.35, V.36, X.21, RS-449, RS-485, EIA-530 and EIA-530A.
(2) Generator
(2.1) SYNCH mode
Clock source: Internal or external clock
Phase relation between clock and data: co-direction or reverse direction.
Rate: 1.2, 2.4, 4.8, 9.6, 14.4, 19.2, 38.4, 48, 56(kbps), N×64kbps (N=1~32)
Error: ±15ppm (ppm: parts per million)
(2.2) ASYNCH mode
Rate: 50,75,110,150,200,300,600,1200,2400,3600,4800,7200,9600; 14.4k,19.2k,38.4k,57.6k(bps)
Data structure: Word length: 5, 6, 7, 8(bits) Stop bit: 1, 2(bits)
Odd-even check: odd, even, 1, 0, none
(2.3) Error code insertion: None, single, or ratio 10-1~10-7.
(3) Receiver
(3.1) SYNCH mode
Clock source: Internal or external clock
Phase relation between receive clock and receive data: Equidirection or reverse direction.
Clock Rate: 2048kbps at a maximum
(3.2) ASYNCH mode
The rate and data are the same as those of the generator.
(4) Testing pattern: 26-1, 29-1, 211-1, 215-1, 220-1, 223-1, and artificial code
Other Parameters
• Power supply
(1) Special power adapter
Input: AC220V 50Hz
Output: DC 9V 1A
(2) Internal rechargeable battery
4000mAh, 6V nickel-hydrogen rechargeable battery
Working time: 8 hours
Charging: 8 hours at power-off state, and 12 hours at power-on state
• Dimension and weight
L×W×H: 200×160×42mm
Weight: 950g
• Ambient parameters
Operation temperature: 0~40?
Storage Temperature: -30~+70?
Humidity: 5%~90%, non-condensing
Standard Configuration
| Minimum Order: 1 |
| Delivery Lead Time: 5 day(s) |
| Supply Ability: 500pcs/month |
|
|
|
|
|
|