This Company is registered for the sectors listed below:
Click on the above sub-sectors to see other companies registered under the same
sub-sector.
|
|
Sell AUTOMATIC LAMI & TUBE FILLING MACHINE
AUTOMATIC COMPACT ROTARY SINGLE HEAD LAMI/PLASTIC TUBE FILLING, SEALING AND CODING MACHINE.
AUTOMATIC AND SEMI AUTOMATIC ALLUMINIUM AND LAMIT TUBE FILLIG AS WELL CONTAINER FILLING MACHINE ARE BEING MANUFACTURED BY US.
TECHNICAL SPECIFICATION AND SALIENT FEATURES OF
The proposed single head Filling Machine fills from 3 Gms to 250 Gms. An output of up to 40 tubes per min. may be achieved, depending on the tube diameter, the volume to be filled and the product characteristics. The machine operates on semi auto function with the operator feeding the tubes manually at the tube in feeder holding station. The tube goes to filling station. After filling the tube travels to the heating station where hot air is blown onto the inside end of the tube by a nozzle. In the mean time, after each filling session a control on tailing is achieved by a pneumatic cut-off system, along with filters, that cleans the nozzle of the excess sample. Next, when the tube is lifted for heating, a cooling ring centers the tube so that heating is uniform around the tube, as also to ensure that the outside portion of the tube is not heated. While heating, the hot air is simultaneously sucked out of the tube so that the product is not affected. The tube then goes to the sealing & coding station where the tube is pressed & sealed and then coded with metal stereos (female). It then travels to the trimming station where the irregular shape at the tube end is trimmed by a set of blades. It is then ejected out at the next collection station.
Necessary functional features like emergency stop, re-set, manual mode inching, user friendly, Resettable 6mm. 8 digit RED – L.E.D on-line production counter, NO TUBE - NO FILL Photo Sensor, etc. are standard with the machine. A low-pressure switch will be provided with interlock & indication on the main operator’s panel to stop filling in event of insufficient air supply.
|
|
|
|
|
|