This Company is registered for the sectors listed below:
Click on the above sub-sectors to see other companies registered under the same
sub-sector.
|
|
 |
|
|
Nylon Cable Tie
Sell Nylon Cable Tie
Material: Nylon 66, 94V-2 certificated by UL. Heat-resisting, erosion control, insulate well and not apt to age.
Color: Natural( or white, standard color), UV black and other colors are available as requested. ...
|
 |
|
|
Nail Cable Clip
Sell Nail Cable Clip
We are large manufacturer of different kinds of Nail cable clips.
Material: PP, Steel nail.
How to use: Put the cable under the clip and hammer the nail into the wall to secure the cable.
Application: Securing of calbes for general indoor wiring.
...
|
 |
|
|
Earth Leakage Circuit Breaker
Sell Earth Leakage Circuit Breaker
1?Usage:Used to protect against leakage in the lines of AC 50 or 60Hz, single-phase 240V, three-phase 240/415V and below of rated voltage and up to 60A of ratedcurrent. It can automatically cut doen the power supply with in 0.1s in the case of electric sh ...
|
 |
|
|
Cable Tie Holder
Sell Cable Tie Holder
[Product #: CH-8]
We offer cable tie holder with excellent quality and competitive price. ...
|
 |
|
|
Expand Nails
Sell Expand Nails
Material:made from PE.
Color:White?Grey
...
|
 |
|
|
Terminal Blocks
Sell Terminal Blocks
TERMINAL BLOCKS H,U(W),V(F)TYPE Material: made from PA, PE OR PP.
...
|
 |
|
|
Wire Connectors-(f3-f8)
Sell Wire Connectors-(f3-f8)
Material: PVC, threaded, Heat-resistant and insulating.
How to use: Put the joint of two wires into the cap and screa if in until it is tight. wall to secure the cable.
Application: Wire joining
...
|
 |
|
|
Nylon Closed-end Wire Connector
Sell Nylon Closed-end Wire Connector
Material: Siver-coated copper piece covred by UL. appoved Nylon or PE.
How to use: put in the bare wire end into the cap and press wit clipper.
Application: Wire joining.
...
|
 |
|
|
Nylon Cable Gland
Sell Nylon Cable Gland
Material: UL Nylon 6/6; neoprene for seal insert, with nut
Color: Black, gray, light gray.
Protection: IP68 Temp. Resistance: -30? to 80?; short time 140? suggested clearance hole for non-threaded mounting.
PG-7
PG-9
PG-11
PG-13.5
PG-16
PG ...
|
|
|
|
|
|