This Company is registered for the sectors listed below:
Click on the above sub-sectors to see other companies registered under the same
sub-sector.
|
|
Sell Intelligent Burglar Alarms (Wireless Alarm System ) [Product #: AL-898A]
Main Features:
*12-zone (8 wireless and 4 wired), 8 wireless zone can expand up to 24 sensors.
*Support to CONTACT ID, ADEMCO and KS6+2 monitoring center protocol
*Access codes, 1 installer code, 1 master code, 8 common user codes and duress code.
*Dial 5 telephone numbers (mobile and pager number). Alarm telephone is priority. ]
*Compatible with DTMF and pulse dialing.
*Phone line be cut or short-circuit will send an alarm. (Indicator or siren for optional)]
*Remote Arm, Disarm, monitor, and on-site alarm setup.
*Automatically learning code between Wireless PIR detector, remote controller and main console (8 wireless can up to 24 zones, and 8 remote controllers)
*Wired zone responds speed (5ms-1000ms) and support (Normal Open, Normal Close and end of line resistance) at freedom.
*Zone attribute can be program for fire alarm, medical alarm, emergency alarm at freedom. Each zone can be programmed with different remote controllers.
*Two timers can be set to Arm/Disarm independently.
*Voice pre-recorded.
*Alarm delay (00-99 seconds) and Arm delay (00-99 seconds) can be set for corresponding zones.
*Main unit disassembly, slave detector disassembly, AC power cut, backup battery lower and slave detector power lower will send alarm.
*Work with wired/wireless Siren and linkage device.
*Latest 20 pieces alarm can be recorded and can’t be deleted. Last Arm/Disarm time can be remembered.
*Main unit and slave detector make communication times in 24 hour to check if there is communication malfunction. If there is a malfunction, the main console will alert corresponding zone within 26 hours.
*Slave detector sends report to main unit once it is turn on. Main unit will indicate.
*Both AC220V and 12V1.2AH storage battery power supply, and change automatically.
*Telephone lightning-proof.
|
|
|
|
|
|